阳离子微粒聚合物在造纸工业中的应用

采用乳剂和溶液的聚合技术制备了不同电荷密度和胶体性质的阳离子微粒聚合物(CPMP)。论文探讨了阳离子微粒聚合物在造纸工业中的应用。研究表明用阳离子或阴离子的聚合物与阳离子微粒聚合物联合使用可以改善纸张的匀度和留着率。其机理可能是由干阳离子微粒聚合物的加入产生了更有效的架桥絮聚。另外阳离子微粒聚合物也是一种良好的施胶剂，研究结果表明施胶效果与聚合物添加量．电荷密度和微粒尺寸有关。通过施胶张可以获得更好的光学和物理性能。     

Studies on the Crystallization Properties and Morphology Structure of the Cationic Dyeable Polypropylene Fibers

The crystallization properties and morphology structure of the cationic dyeable polypropylene fibers which were produced by the blending spinning method were studied by making use of X-ray and scanning electron microscopy (SEM). It comes to the conclusions that the larger the crystallite size in the fibers is , the better the dycable properties of the fibers are and there is a little compatibility between the dyeable agent and polypropylene resin. And the dye-uptake of the fibers may be up to 90% because the dyeable agent can uniformly be scattered in polypropylene.     

炭黑／结晶性含氟树脂合金在自控温加热电缆中应用

选择了结晶性含氟树脂添加改性剂为树脂基体，与炭黑制居复合导电体系。通过这个对体系不同条件下ＰＴＣ特性的研究，对其配方与加工工艺进行优化。并利用扫描电镜，Ｘ射线衍射，ＤＳＣ等分析测试手段，对体系的各种开矿结构进行了研究，阐明了该导电复合体系的形态结构与性能的关系。     

一种新型粘土稳定剂的合成与应用研究

本文简要报导了有机阳离子聚和物(氯化N,N—二甲基二烯丙基铵—二氧化硫)的合成方法,并对其作为粘土稳定剂的性能进行了评价。结果表明,该共聚物稳定粘土的能力高于目前国内外广泛使用的同类聚合物TDC。     

离子交换树脂非均相催化酯化合成丙烯酸丁酯

研究了在间歇搅拌釜中以阳离子交换树脂为催化剂，由丙烯酸和丁醇合成丙烯酸丁酯。分别考察了不同类型离子交换树脂的催化酯化作用，并且研究了搅拌速度、催化剂用量以及反应温度对酯化反应的影响。研究结果表明以KNC9型离子交换树脂在373.15-393.15K温度下具有最好的催化酯化作用。     

吸附树脂对对甲苯胺的静态吸附行为及其热力学性质的研究

对比 Amberlite XAD-4与两种新型吸附树脂 NK和新 H对对甲苯胺的静态吸附行为 ,根据吸附等温线研究并讨论吸附热力学性质 .两种新型吸附树脂对对甲苯胺的吸附能力明显强于 Amberlite XAD-4 ,微孔作用机制及表面部分极性起决定作用 .吸附焓变 ΔH<0表明吸附为放热过程 ,降低温度有利于吸附 .对吸附焓变和自由能变的讨论同时表明树脂对对甲苯胺的吸附为多层物理吸附过程 .吸附熵变 ΔS表明吸附树脂表面的不均匀性和吸附质分子在树脂表面的分布及其局域运动与吸附有密切关系 .     

Analysis of Pyrolysates for Phenol Formaldehyde Resin by Py-GC/MS

Pyrolysis of phenol formaldehyde resin has been investigated by Pyrolysis Gas Chromatography-Mass Spectroscopy at the different temperatures from 500℃ to 750℃. Its composition of pyrclysates has been analyzed. Several compounds, especially benzene, toluene, p-xylene could only be formed above 500-550℃. Howerver, peak intensities for some pbend derivatives were decreased at the higher temperature. During pyrolysis, for thermo-setting phenol formaldehyde resins, polymeric chain scissions take place as a successive removal of the monomer units from the polymeric chain. The chain scissions are followed by secondary reactions, which leads to a variety of compounds. Addition reactions can also take place among the double-bond compounds during pyrolysis.     

纳米CaCO3/丙烯酸树脂浆液的流变性

制备了纳米CaCO3/丙烯酸树脂浆液,当浆液(48 gZ-26、50g纳米CaCO3和83.3 g二甲苯)中分散剂添加量为3 g时,Casson屈服应力τc值最小,浆液的稳定性最好,与工艺条件优化时所得到的一致.纳米CaCO3/丙烯酸树脂浆液的流变性研究表明:该体系的流动特性符合Casson模型,其屈服应力τC较小,稳定性较好;浆液的黏度随剪切速率增加而显著下降,具有明显的剪切稀化特性,且随着纳米CaCO3含量增加,其剪切稀化趋势增强;在所考察的低剪切速率范围内,纳米CaCO3浆液具有明显的触变性,且纳米CaCO3含量越大触变性越大.图10,表7,参8.     

Hydrogenation of Polymer

1 Introduction Hydrogenated polymer resins arei mprovedsolubility with other polymer ,transparency andstability,usinghot melt adhesive ,insulation oil ,optical materials .The hydrogenationis different to monomer because of shapeobstacle ,spread of molecular ,solid or high viscosity at roomtemperature .And separation of catalyst is not soeasy after the reaction.DCPDresinis hydrogenated with Ni-Kieselgur in cyclohexane .